Qalabka yar yar ee Robot-ka Warshadaha 4-ta dhidib ee 10kg oo ah Gacanta Robot-ka ee culayska badan

Qalabka yar yar ee Robot-ka Warshadaha 4-ta Dhidib ee 10kg oo ah Gacanta Robot-ka ee la saaray Sawirka Muuqda

Sharaxaad Gaaban:

SCIC Z-Arm 4160 waxaa naqshadeeyay SCIC Tech, waa robot iskaashi oo fudud, si fudud loo barnaamijin karo loona isticmaali karo, wuxuu taageeraa SDK. Intaa waxaa dheer, waxaa taageera ogaanshaha shilalka, taas oo ah, inay si otomaatig ah u joogsan doonto marka la taabanayo aadanaha, taas oo ah iskaashiga caqliga leh ee aadanaha iyo mashiinka, amnigu waa mid sarreeya.

Istaroog dhidibka Z:410mm (Dhererka waa la habeyn karaa)

Xawaaraha toosan:1500mm/s (culeys dhan 3kg)

Ku celcelinta:±0.05mm

Culeyska caadiga ah:3kg

Culayska ugu badan:3.5kg

Noo soo dir emayl

Faahfaahinta Badeecada

Calaamadaha Alaabta

Qalabka yar yar ee Robot-ka Warshadaha 4-ta dhidib ee 10kg oo ah Gacanta Robot-ka ee culayska badan

Qaybta ugu Muhiimsan

Gacan robot-ka warshadaha / Gacan robot oo iskaashi ah / Qabanqaabiye koronto/Xalalka firfircoonida caqliga leh/Otomaatig

Codsiga

Kobot-yada SCIC Z-Arm waa robotyo wada shaqeyn oo 4-axis ah oo fudud oo leh matoor wadista gudaha ku dhisan, mana u baahna wax-yareeye sida scara-yada kale ee dhaqameed, taasoo hoos u dhigaysa kharashka 40%. Kobot-yada SCIC Z-Arm waxay fulin karaan shaqooyin ay ku jiraan laakiin aan ku koobnayn daabacaadda 3D, maaraynta agabka, alxanka, iyo qorista laysarka. Waxay awood u leedahay inay si weyn u horumariso hufnaanta iyo dabacsanaanta shaqadaada iyo wax soo saarkaaga.

Astaamaha

Saxnaan Sare
Ku celcelinta
±0.05mm

Dhidibka ZHabayn
0.1-1m

Ballaca Gacanta Weyn
Dhidibka J1 325m
Dhidibka J2 275m

Qiimaha Tartanka
Tayada heerka warshadaha
Cqiimo macquul ah

Fudud in la Barnaamijeeyo, Si Degdeg ah loo Rakibo, Gacan Robot ah oo 4-dhidib leh oo Dabacsan

Saxnaan Sare

Ku celcelinta: ±0.05mm

Ballaca Gacanta Weyn

J1-Dhexe: 325mm,Dhidibka J2: 275mm

Z-Axis oo la habeeyey

Dhererka kor u kaca waxaa loo habeyn karaa inta u dhaxaysa 10cm-1.0m

Kaydinta Booska

Darawalka/Xakameeyaha ayaa ku dhex jira

Fudud oo Fudud in la Isticmaalo

Qofka cusub ee aan aqoon gacanta robot-ka sidoo kale wuu fududaan karaa in la isticmaalo, is-dhexgalka ayaa furmaya.

Xawaaraha Sare

Xawaarihiisu waa 1500mm/s marka la eego culayska 3kg

Badeecadaha La Xiriira

Z-Arm-2140

Z-Arm-1832

Z-Arm-S922

Halbeegga Tilmaamaha

Gacanta Robot-ka ee iskaashatada ah ee Z-Arm 4160	Xuduudaha
Dhererka gacanta 1 dhidib	325mm
1 xagal wareeg ah	±90°
Dhererka gacanta 2 dhidib	275mm
Xagal wareeg oo 2 dhidib ah	±164° Ikhtiyaar: 15-345°
Xiinka Z-dhidibka	Dhererka 410 waa la habeyn karaa
Kala duwanaanshaha wareegga dhidibka R	±1080°
Xawaaraha toosan	1500mm/s (culeys dhan 3kg)
Ku celcelinta	±0.05mm
Culeyska caadiga ah	3kg
Culayska ugu badan	3.5kg
Heerka xorriyadda	4
Koronto la'aan	220V/110V50-60HZ wuxuu la qabsan karaa awoodda ugu sarreysa ee 48VDC 960W
Isgaarsiinta	Ethernet
Ballaarinta	Xakameeyaha dhaqdhaqaaqa ee isku dhafan ee ku dhex jira wuxuu bixiyaa 24 I/O + ballaarinta gacanta hoosteeda
Dhidibka Z waxaa loo habeyn karaa dherer ahaan	0.1m~1m
Waxbarashada jiidista dhidibka Z	/
Isku-xirka korontada ayaa la keydiyay	Qaabeynta caadiga ah: 24 * 23awg (aan gaashaan lahayn) fiilooyin ka soo baxa godka godka ilaa daboolka gacanta hoose Ikhtiyaar: 2 φ4 tuubooyin faakiyuum ah oo dhex mara guddiga godka iyo flange-ka
Qabanqaabiyeyaasha korontada ee HITBOT ee la jaan qaadi kara	Z-EFG-8S/Z-EFG-12/Z-EFG-20/Z-EFG-20S/Z-EFG-20F/Z-ERG-20C/Z-EFG-30/Z-EFG-50/Z-EFG-100/5-ta^thAxis, daabacaadda 3D
Iftiin neefsasho leh	/
Kala duwanaanshaha dhaqdhaqaaqa gacanta labaad	Heerka: ±164° Ikhtiyaar: 15-345deg
Qalabka ikhtiyaariga ah	/
Deegaanka isticmaalka	Heerkulka jawiga: 0-45°C Qoyaan: 20-80% RH (dhar la'aan)
Gelinta dhijitaalka ah ee dekedda I/O (go'doonsan)	9+3+ fidinta gacanta hore (ikhtiyaar)
Wax soo saarka dhijitaalka ah ee dekedda I/O (go'doonsan)	9+3+ fidinta gacanta hore (ikhtiyaar)
Gelinta analogga ah ee dekedda I/O (4-20mA)	/
Wax soo saarka analogga ah ee dekedda I/O (4-20mA)	/
Dhererka gacanta robot-ka	830mm
Miisaanka gacanta robot-ka	Miisaanka saafiga ah ee 410mm 28.5kg
Cabbirka salka	250mm250mm15mm
Masaafada u dhaxaysa godadka hagaajinta salka	200mm200mm oo leh afar boolal M820 ah
Ogaanshaha shilka	√
Jiidashada waxbaridda	√

Xulashada Ku Habboon ee Hawlaha Isu-imaatinka Fudud

Z-Arm XX60 waa gacan robot ah oo 4-dhidib leh oo leh gacan weyn, oo ku habboon meel yar, aad ugu habboon in lagu rakibo saldhigga shaqada ama gudaha mashiinka, waa xulasho ku habboon hawsha isu-imaatinka fudud.

Fudud oo leh xagal Wareeg weyn

Miisaanka badeecadu waa qiyaastii 28.5kg, culayskeeda ugu badan wuxuu noqon karaa ilaa 3.5kg, malaa'igta wareegga ee 1-dhidibka waa ±90°, xagasha wareegga ee 2-dhidibka waa ±164°, kala duwanaanshaha wareegga ee dhidibka R wuxuu noqon karaa ilaa ±1080°.

Ballaca Gacanta Weyn, Codsiga Ballaaran

Z-Arm XX60 wuxuu leeyahay gacan dheer, dhererka dhidibka 1 waa 325mm, dhererka dhidibka 2 waa 275mm, xawaaraha toosan wuxuu noqon karaa ilaa 1500mm/s marka la eego culeyska 3kg.

Dabacsan in la hawlgeliyo, si dhakhso leh loo beddelo

Z-Arm XX60 wuxuu leeyahay astaamo fudud, badbaadin meel bannaan iyo dabacsanaan in la rakibo, wuxuu ku habboon yahay in lagu rakibo codsiyo badan, mana beddeli doono qaab-dhismeedka wax soo saarka ee hore, oo ay ku jiraan taxanaha habka oo degdeg ah iyo dhammaystirka dufcad yar oo wax soo saar ah, iwm.

DragTeaching si loo dhamaystiro barnaamijka

Barnaamijku wuxuu ku salaysan yahay naqshadeynta garaafka, wuxuu bixiyay dhibic, calaamad wax soo saar, qabsasho koronto, saxaarad, dib u dhac, hoos-u-socod, dib-u-dejin iyo module kale oo asaasi ah oo shaqeynaya, isticmaalayaashu waxay jiidi karaan moduleka si ay u xakameeyaan gacanta robot-ka ee aagga barnaamijyada, is-dhexgalka waa mid fudud, laakiin shaqadu waa awood badan tahay.