Iskaashatada Robot Gripper - Z-ECG-20 Saddex Farood oo Koronto ah
Qaybta ugu weyn
Cududda robot-ka warshadaha / gacan-ku-qabsiga robot-ka-xakameeyaha/xalalka caqliga leh/xalalka otomaatiga ah
Codsiga
Muuqaal
·Ogaanshaha dhibicda xajin, shaqada wax soo saarka aagga
·Xoog, booska, xawaaraha la kontarooli karo, kontoroolka saxda ah ee Modbus
·Qabashada dhexe ee saddex farood
·Xakamaynta la dhisay: raad yar, is dhexgalka fudud
·Habka xakamaynta: 485 (Modbus RTU), I/O
Qaboojiyaha Korantada ee Saddex-daanka ah Way fududahay in la isku dhejiyo Shayada Silinder
Waxqabad Sare
Xooga isku dhejinta: 30-80N,
Cufnaanta Tamarta Sare
Faalig Weyn
Wadarta istaroogga: 20mm (la hagaajin karo)
Xakamaynta saxda ah
Waxaa gacanta ku haya Modbus
Kontorooluhu waa lagu dhex dhisay
Daboolka aagga yar, fududahay in la isku daro.
Dhaqso iyo Waxtarka Sare
Ku celcelinta: ± 0.03mm,
Hal garaac: 0.5s
3-Daanka Daanka
3-daanka in la isku dhejiyo, oo ku habboon waqtiyo kala duwan
Qiyaasta cayiman
| Qaabka No. Z-ECG-20 | Halbeegyada |
| Wadarta istaroog | 20mm (la hagaajin karo) |
| Xoog qabsi | 30-80N (la hagaajin karo) |
| Ku celcelinta | ±0.03mm |
| Miisaanka qabsashada ee lagu taliyay | Max.1kg |
| Gudbinta hab | Rack iyo Pinion + Hagaha Kubbada Tareenka |
| Dufanka buuxinta qaybaha dhaqaaqa | Lixdii biloodba mar ama 1 milyan oo dhaqdhaqaaq/wakhti |
| Waqtiga dhaqdhaqaaqa istaroogga hal-jid ah | 0.5s |
| Kala duwanaanshaha heerkulka shaqaynayo | 5-55 ℃ |
| Kala duwanaanshaha qoyaanka shaqeynaya | RH35-80(Dhaxan ma jiro) |
| Waqtiga ugu gaaban ee hal istaroog | 0.5s |
| Xakamaynta istaroogga | la hagaajin karo |
| Isku hagaajinta xoogga | la hagaajin karo |
| Miisaanka | 1.5kg |
| Cabirka(L*W*H) | 114*124.5*114mm |
| Heerka IP | IP54 |
| Nooca mootada | Servo Motor |
| Hadda ugu sarreysa | 2A |
| danab la qiimeeyay | 24V ± 10% |
| Joogitaanka hadda | 0.8A |
| Culayska taagan ee la oggol yahay ee jihada toosan | |
| Fz: | 150N |
| Qulqulka la oggol yahay | |
| Mx: | 1.5 Nm |
| My: | 1.5 Nm |
| Mz: | 1.5 Nm |
Xaqiijinta Booska, Saddex-farood Qabe
Xajiyeyaasha korantada ee 3-daanka ah waxay leeyihiin dib-u-celin ± 0.03mm, si ay u qaataan xajinta saddexda daan, waxay leedahay shaqada tijaabada dhibcaha, wax soo saarka qaybta, taas oo ka fiicnaan karta in ay wax ka qabato hawsha isku-duubka ee walxaha cylinder.
Xakameeyaha Ku dhex-dhisan, Is-dhexgalka Sare
Istarooggu waa 20mm la hagaajin karo, xoogga isku dhejinta waa 30-80N la hagaajin karo, waa in la isticmaalo hababka gudbinta ee Gear rack + xadiidka hagaha kubbadda, waa kontaroolaha la dhisay = gudaha, xoogga xajinta iyo xawaaraha waa la xakameyn karaa.
Cabbir yar, Dabci in lagu rakibo
Cabbirka Z-ECG-20 waa L114 * W124.5 * H114mm, miisaanku waa 0.65kg kaliya, waa qaab dhismeed isku dhafan, taageero noocyo rakibo ah, oo ay fududahay in lala tacaalo hawlo kala duwan oo isku dhejis ah.
Si degdeg ah looga falceliyo, Xakamaynta Ciidanka Saxda ah
Xajmiga korantada wuxuu leeyahay shaqada tijaabinta dhibcaha xajinta iyo soosaarka qaybta, miisaankeedu waa 1.5kg, biyuhu waa IP20, miisaanka xakamaynta talada waa ≤1kg, waxay xaqiijin kartaa saxnaanta sare ee xajinta.
Ku dhufo Hababka Xakamaynta, fududahay in la shaqeeyo
Xajmiga korantada ee Z-ECG-20 waxaa si sax ah u xakameyn kara Modbus, qaabeyntiisa xajintu waa mid fudud, si aad uga faa'ideysato borotokoolka Digital I/O, kaliya waxaad u baahan tahay hal fiilo si aad ugu xirto ON/OFF, waxay sidoo kale la jaan qaadaysaa nidaamka kontoroolka weyn ee PLC.
Load Center of Gravity Offset
Ganacsigeena
